How to Properly Clean the Heated Mattress Pad?-Complete Cleaning and Maintenance Guide

Introduction

Whenever winter comes, we are always troubled by the temperature of the bed. Some people rely on hot water bottles, some rely on air conditioning, while others (such as us) move out the heated mattress pads early, making the bed a warm harbor. However, over time, we may also discover an awkward issue - it has become dirty.

So the question arises: can the heated mattress pad be washed? How should I wash it? Will the washing machine not break?

Don't laugh, we also had these questions back then. In fact, the correct cleaning method can not only extend the lifespan of heated mattress pads, but also ensure safe use. Today, we will guide through the cleaning and care methods of heated mattress pads in a down-to-earth way.

Ⅰ. Characteristics of Heated Mattress Pads and Why They Are Difficult to Clean

Before we officially start washing, we need to first understand this guy's' temper '.

A heated mattress pad isn't like a regular bed pad in that it consists of precision systems consisting of heating wires, controllers, and connecting wires hidden internal. As soon as those additives end up damp, twisted, or overheated, they'll cause brief circuits or maybe protection dangers.

Truly put, it's miles each a bedding and an electrical appliance. Because of this when cleaning it, we want to be as mild as treating a cotton cover and as careful as cleansing electronic gadgets. On occasion, in a second of desperation, users stuff the entire heated mattress pad into the washing device and wash it wildly, most effective to discover the following day that it's no longer warm.

So, expertise why it's tough to easy is our first step in heading off tragedy.

Ⅱ. The Main Reasons Why Heating Mattress Pads Are Difficult to Clean Are:

It contains wires and heating elements inside and cannot be soaked for a long time;

The high-speed rotation of machine washing and spin drying can easily damage the heating wire;

If the drying temperature is too high, it may cause deformation of the internal structure;

Some models do not support water washing and can only be cleaned locally;

If the strength manage line is not removed, it is particularly possibly to reason a quick circuit.

According to the "Electric Mattress Care Association" (yes, it actually exists), dry cleaning solvents are more likely to damage the internal structure of heated mattress pads than water. The real trick is to shorten the contact time with water, gently clean, and dry at low temperatures.

Ⅱ. Precautions Before Cleaning the Heated Mattress Pad

Preparation work is crucial before formal cleaning. We have summarized four keywords: look, pull, test, and choose.

1. Look - carefully examine the washing label

Always look at the labels first!

The cleaning methods for heating mattress pads of different brands and models may vary greatly. Some can be machine washed, some can only be hand washed, and some are labeled as "local cleaning only".

Labels usually indicate:

Is it machine washable

Suggested water temperature

Do not use bleach or fabric softener

Drying temperature limit

This step may seem simple, but it is the key to safe cleaning. After all, no one wants a laundry to become a 'farewell ceremony'.

2. Unplug - Power off, remove controller

Before starting, be sure to unplug the energy, remove the controller and wires. This is step one in making sure safety.

We once nearly turned the bathing machine into a "hot water factory" because we forgot to unplug the wires, and that scene can be said to be an "electrical model of steampunk".

3. Testing - take a look at the wires and interfaces

Check whether or not the manage strains and interfaces are worn or free. In case we find cracks or burn marks, don't take the threat of cleaning them.
In this case, the wisest technique is to touch the manufacturer or expert repair.

4. Pick - determine the cleaning technique

Not all heated mattress cushions are suitable for machine washing. In case our heated bed pad length is large or the washing device capacity is restrained, it is advocated to pick out hand washing.

Remember to prepare warm water and neutral detergent - they are the gentlest companions.

Ⅲ. How Should We Properly Clean the Heated Mattress Pad

Finally arrived at the highlight: washing!

1.Machine washing section

If machine washing is allowed on the instruction manual, the following steps can be followed:

Power off and disconnect: Confirm again that all wires and controllers have been removed.

Use cold or warm water (not exceeding 30 ° C).

Select the gentle/delicate cycle mode.

Add mild detergent, do not use bleach and softener.

The cleaning time should not be too long and should be controlled within 15 minutes.

Low speed dehydration or natural spin drying, avoid high-speed rotation.

We usually located the heated mattress pad separately in a laundry bag to reduce friction and pulling.

After washing, do no longer rush to throw it into the dryer.The perfect approach is to softly flatten and air dry.

2.Hand washing phase

For patterns with labels that say 'hand wash is exceptional', please follow those steps:

Prepare a sufficiently large bathtub or basin, upload warm water and the precise quantity of impartial detergent;

Soak the heated mattress pad flat for about 10-15 mins;

Lightly press the grimy location along with our hands, do no longer rub or twist it;

Rinse again and again with easy water till there may be no foam;

Use a towel to absorb excess moisture, however take into account not to wring it dry.

The primary time we hand washed, it felt like we have been looking after a 'fragile cat' - we had been continually afraid it'd ruin. However so long as we preserve patience, it is surely quite clean to serve.

Ⅳ. What Else Do We Want to Do After Cleansing and Heating the Mattress Pad

Cleansing is most effective step one, drying is the important thing to determining its lifespan.

1. Natural drying is the excellent choice

Lay the heated mattress pad flat in a ventilated vicinity to dry, keeping off direct daylight and high temperatures.

Since everything has been washed clean, let's share some tips for use and maintenance to make it "hot" for longer and more reassuring.

2.Add a layer of mattress protective cover

Our most practical secret is to lay a protective cover on top of the heated mattress pad.

This can prevent sweat stains, dust, and liquids from directly penetrating, and also reduce the number of cleaning times.

3.Regularly check the power cord and plug

Check every few months for wear or looseness.

Sometimes discovering small problems early can avoid big troubles.

4.Don't pile too many things on it

As an instance, electric powered blankets, heating water baggage, heavy bedding, etc. May also all have an effect on warmth dissipation.

Let it breathe, the heat might be more evenly allotted.

5.Don't forget to respire dry

After every cleansing or whilst no longer in use for a long term, we could open the window for air flow to keep the mat dry.

Ⅴ. Summary

Cleansing and heating mattress pads is not complex, the important thing lies in being mild and cautious.

Consider our three-step mnemonic:

Power off, light wash, and dry at low temperature.

As long as we master the correct method, our heated mattress pad can not only be cleaner, but also extend its service life.

We also pay special attention to the detachable and easy to clean design when producing heated mattress pads in the factory, because we know that what users really need is a "warm and safe" sleep experience.

If we are still hesitating whether to wash it or not - don't be afraid, follow our steps, there's absolutely no problem.